Fire doors – wooden fire doors wholesale supplier from new delhi

.

Fire doors delay the spread of fire and smoke, different parts of a building may be separated from each other, into compartments with the help of these doors. Euro to usd exchange rate Hence every fire door is therefore required to act as a barrier to the passage of smoke and fire to varying degrees dependent upon its location in a building and the fire hazard associated with the building.

FRAME:- Supply of door frames made out Hardwood of size 120 x 60 mm suitable for Fire Resistance Shutters of 30 minutes, with heat activated Intumescent fire seal strips of size 10 x 4 mm provided in grooves on all three sides of the frame.


SHUTTER:- Supply of 45mm thick asbestos free composite fire and smoke check wooden shutter of 30 minutes rating similar to the prototype tested and certified at CBRI Roorkee and confirming to BS: 476 part-22 IS: 3614 part-II comprising of 15mm thick fire resistance insulation filler sandwiching with two 12mm thick non Combustible boards with 75 x 39mm hardwood internal timber frame work and faced with 3mm thick commercial ply on both sides with hardwood lipping on all around the shutter with heat activated in tumescent fire seal strips of size 10 x 4mm on all sides of the shutter except bottom.

Fire-rated doors are integral components of any passive fire-protection design in the built environment. Decimal word problems 6th grade To protect against the spread of fire and smoke within or in or out of the buildings, the maintenance and engineering managers need to implement a preventive maintenance program for fire doors in accordance with locally adopted codes and national standards. Binary to ascii 46 MM thick Steel Fire Door of 60 minutes Fire Rating

FRAME: – Door frames to be single / double rebate profile manufactured from 16 gauge galvanized steel, profile to have bending radius of 1.4 mm supplied in assembled form ready to install at site.

SHUTTER: – Door Shutter in 46 mm thick manufactured from two 18 gauge galvanized steel sheets lock seam jointed at stile edges to form a double skin fully flush shell. Ntd to usd Infill of Properitory insulation material to be provided for structural rigidity additional reinforcements for all hardware fixtures as required sound Insulation with one coat of fire resistant primer.

FRAME: – Door frames to be single / double rebate profile manufactured from 16 gauge galvanized steel, profile to have bending radius of 1.4 mm supplied in assembled form ready to install at site. Usd to jpy exchange rate SHUTTER : – Door Shutter in 46 mm thick manufactured from two 18 gauge galvanized steel sheets lock seam jointed at stile edges to form a double skin fully flush shell. Usd to cad exchange rate history Infill of Properitory insulation material to be provided for structural rigidity additional reinforcements for all hardware fixtures as required sound Insulation with one coat of fire resistant primer.

All materials are found on open spaces of a network the Internet as freely extended and laid out exclusively in the fact-finding purposes. If you are what lawful legal owner or a product and against its placing on the given site, inform us and we will immediately remove the given material. The administration of a site does not bear responsibility for actions of the visitors breaking copyrights. abuzesite@bigmir.net

banner